Aritech ATS4000 Manuel de service télécharger pdf (Page 67)

ATS Designers Guide 67

Besides hardware compatibility, the user card compatibility needs to be ensured. The

ATS system supports many access card formats - see Table 4-19 – but not all of them

are supported by the control panel. The HID readers – see Table 4-13 – are compatible

with the HID access control cards in the ATS Wiegand 32 bit format – see Table 4-14.

Cards of this format are supported by the ATS1250/60 DGP, which means it’s sufficient

to program the card series for it to be active in the system. The control panel does not

support this format directly so for them to be connected directly to the system bus, the

IUM option of the ATS system needs to be used. This means that each card in the

system will have to be read during installation and stored in the user database.

Table 4-13 HID readers

Product Description

ACI730 Proximity card reader HID ProxPro Plus, range up to 20 cm, external

ACI755 Proximity card reader HID ProxPro, range up to 20 cm, external

ACI757 Proximity card reader HID ProxPro, range up to 20 cm, with keyboard

ACI760 Proximity card reader HID ProxPoint, range 5cm, low cost

ACI765P Proximity card reader HID MiniProx, range up to 10cm, miniature, external

ACI775 Proximity card reader HID MaxiProx, range 70 cm, waterproof, external

ACI795

Proximity card reader HID, range up to 14 cm, in flat housing, external .

(optional colour – white)

Table 4-14 HID cards

Product Description

ACT725-xx Proximity card for HID ProxCardII readers

ACT736-xx Dual card DuoProxII (magn.+ proximity HID), thin (ISO), printable

ACT745-xx ProxKeyII key fob, for HID readers

ACT786-xx Proximity card for HID ISO ProxII readers , thin (ISO), printable

ACT790-xx

Active proximity HID identifier (with battery) for vehicles, Dimensions: 10*7

Table 4-15 Technical parameters of the HID readers.

HID Parameter ACI730 ACI755 ACI757 ACI760 ACI766 ACI775 795

Reader range 25cm 20cm 7,6cm 14cm 73cm 14cm

Keyboard - - Yes - - - -

Voltage 10-28,5VDC 5-16VDC 5-16VDC 12/24VDC 5-16VDC

Power cons. 100mA 100mA 30mA 20mA 200mA 20mA

Power cons., max. 120mA 120mA 75mA 110mA 1,2A 115mA

Dimensions 190x190x23 127x127x25 79,6x43,7x17

152x43x25

300x300x25 119x76x17

Housing Polycarbonates UL94

Operating temp. -30 – 65

Operating freq. 125kHz

Humidity 95%

4.5.2.2 MIFARE

MIFARE readers –Table 4-16 – are connected to the ATS system exactly like any other

Wiegand interface reader. (Ex. HID – see Drawing 4-6.) The offered readers are universal

multi-protocol devices, identifying the MIFARE cards (smart cards) by the serial number

of the card’s chip. Readers of this type – often called serial readers – are used to

integrate an existing installation, based on MIFARE smart cards, with the Advisor

MASTER system.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 82 83

Commentaires sur ces manuels

Pas de commentaire

Aritech ATS4000 Manuel de service Page 67

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Aritech ATS4000