Aritech ATS3000 Guide de l'utilisateur télécharger pdf (Page 49)

ATS2000/3000/4000/4500 Manager’s Guide

15. TIME AND DATE

Use this function to program a new time and date.

The time and date are not visible during normal use of the Advisor MASTER system;

however, all internal functions rely on them.

A new date or time only needs to be programmed when the Advisor MASTER system is

first installed, or if the time needs to be adjusted for daylight saving.

The time is programmed for a 24-hour clock.

Access menu option 15

The main menu shows:

To check the time setting press 1

The display shows:

e.g.

1. Press [MENU*] to get an updated time/date

2. Press [ENTER] to return to the main menu

To program a new time and date

1. Enter option 2. The display shows:

(Where hh:mm dd/mm/yy Xxxxday are the current time and date held by the system

as hour, minute, day, month, year and day of the week.)

2. Enter the correct hour (2 digits) and press [ENTER].

The display shows:

3. Enter the correct minutes (2 digits) and press [ENTER].

Time & Date hh:mm:ss dd/mm/yy Xxxday

Hours:

Time & Date hh:mm:ss dd/mm/yy Xxxday

Minutes:

Time 1-Display, 2-Set, 3-DST, 4-Adjust

0-Exit, Menu:

Time 16:41:22 09/03/2000 Thursday

* Update, Enter

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 70 71

Pas de commentaire

Aritech ATS3000 Guide de l'utilisateur Page 49