Aritech CS175 Guide d'installation télécharger pdf (Page 105)

CS175-275-575-875 Installation Guide 105

2. The keypad prompts you to enter a module number.

3. Enter the module number and press

. The module number is the DIP switch

setting and can be from 32 to 39.

4. Press 199# to select location 199.

5. Press XX

where XX is the zone number (1 to 168) and

is the entry key.

6. Perform a walktest on the device. PIR detectors transmit only if there has been no

movement within the area for two minutes.

7. When the device has transmitted, you can record the reading from location 200.

Press 200# to get the RSSI reading.

8. Note the RSS reading and repeat steps 4 to 7 for the other detectors.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 166 167

Pas de commentaire

Aritech CS175 Guide d'installation Page 105